The height of the mast is not a function of the heighth of the angle I wanted. It had to be that high to be able to be placed that far away and still be able to swing down so I could work the controls. People who exceed my level of flexibility could change that up a bit, but as it is, I'm turning on the controls blind. I turn off the cameras screen and turn up the control sounds so I can hear when the camera goes on or I've pressed the record button. Having a mind of its own by this time, my camera stops recording on its own usually a couple minutes after I start it, which actually works pretty well with the lengh of the videos I shoot. It makes a beep when it turns off, but as you can imagine in the dynamic marine environment, I don't always hear it, which makes it difficult to know whether the camera is ready to take the next shot. I admit, it does seem somewhat of a Rube Goldberg affair!
Photos of me by Duane Strosaker.
The bungy has to be tied tight enough to hold the rig down, but leave enough
stretch to allow it to tilt down.
Can't tell you just how I do it, because it changes each time I tie it!
Since these photos were taken, I've switched to this new camera mount. With the old one, the camera was attached directly to the PVC which allowed any sound on the hull to travel all the way up to the camera. The new L shaped foam provides some sound insulation so I can use some whatever natural sound I capture.
It also keeps the camera oriented better while fumbling with the controls.